Anchor Bolts

Custom anchor bolt manufacturing in any configuration and material

Materials & Specifications

ASTM F1554

ASTM F1554 is the standard specification for anchor bolts, steel, for structural applications. A&M Nut & Bolt manufactures anchor bolts in all three grades of ASTM F1554.

The F1554 anchor bolt is currently the most common anchor bolt specification. This specification includes Double End Studs, Bent Anchor Bolts, and headed configurations. ASTM F1554 is available in three strength grades, two thread classes, and a range of sizes for structural support applications.

Material Grades

F1554 Grade 36

Grade 36 anchor bolts are your standard, low strength anchor bolt and weldable steel anchor bolt with a minimum yield strength of 36 ksi. These bolts replace ASTM A307 Grade C.

  • Tensile: 58 ksi
  • Yield (min): 36 ksi
  • Diameters Covered: 1/2"-4"
  • Identification Color: Blue
F1554 Grade 55

Grade 55 anchor bolts are mild steel bolts providing a minimum yield strength of 55 ksi. Like Grade 36, they can be ordered as hot dip galvanized, mechanically galvanized, or plain black finish.

  • Tensile: 75 ksi
  • Yield (min): 55 ksi
  • Diameters Covered: 1/2"-4"
  • Identification Color: Yellow
F1554 Grade 105

Grade 105 anchor bolts are the highest strength bolts within ASTM F1554. They are manufactured from a heat treated alloy steel and have a minimum yield strength of 105 ksi.

  • Tensile: 125 ksi
  • Yield (min): 105 ksi
  • Diameters Covered: 1/2"-3"
  • Identification Color: Red

Key Points About ASTM F1554

  • ASTM F1554 was specifically created to cover bolts with the sole purpose of anchoring structural supports to concrete foundations.
  • Any time F1554 Grade 36 is specified the manufacturer can provide weldable F1554 Grade 55 as an acceptable substitute.
  • A nut can be tack welded to the end of a Double End Stud to provide an anchoring feature similar to a hex head in most cases.
  • F1554 Grade 105 often dual certifies to ASTM A193 Grade B7 due to their properties being virtually identical.
  • UNC-2A Threads are typically provided.

Our team can help you select the appropriate grade, finish, and configuration for your specific application.

ASTM A193

ASTM A193/A193M covers alloy-steel and stainless-steel bolting materials for high-temperature or high-pressure service. It is commonly specified for studs, bolts, and other threaded fasteners used in flanges, valves, pressure vessels, and related industrial piping applications. Grade selection depends on the required balance of strength, corrosion resistance, operating temperature, and service environment.

Common Material Grades

Grade B7

Heat-treated chromium-molybdenum alloy steel for high-strength bolting in high-pressure and elevated-temperature service.

  • Alloy steel
  • Quenched and tempered
  • High-strength general-purpose A193 grade
  • Common for flanges, valves, and pressure-boundary bolting

Typical minimum properties

Tensile: 125 ksi

Yield: 105 ksi

Values vary by diameter and product form.

Grade B8

304 stainless steel bolting for applications requiring corrosion resistance. Available in Class 1 and Class 2.

  • Stainless steel
  • Better corrosion resistance than B7
  • Common in corrosive or moisture-exposed service

Class designation

Class 1: solution treated

Class 2: strain hardened for higher strength

Grade B8M

316 stainless steel bolting with improved corrosion resistance over B8. Available in Class 1 and Class 2.

  • Stainless steel
  • Better corrosion resistance than B8
  • Often chosen for harsher chemical or outdoor environments

Class designation

Class 1: solution treated

Class 2: strain hardened for higher strength

Key Points about ASTM A193

  • B7 is typically selected when high strength is the primary requirement.
  • B8 and B8M are stainless grades used where corrosion resistance is important.
  • B8M generally offers better corrosion resistance than B8.
  • For B8 and B8M, strength depends on whether the material is Class 1 or Class 2.
  • UNC-2A Threads are typically provided through 1" Diameter. Above 1" diameter may be supplied in UN8 (8 Threads Per Inch) or UNC-2A.

Use the grade that matches the actual service conditions: strength, corrosion exposure, temperature, and code requirements all matter.

Material Finish Options

Standard Finishes

  • Plain (Black): Carbon steel, no coating
  • Hot-Dip Galvanized: ASTM A153, corrosion resistant
  • Mechanical Galvanized: Zinc coating, uniform thickness
  • Zinc-Plated: Electroplated, light protection

Specialty Finishes

  • Stainless Steel: 304/316, corrosion resistant
  • PTFE Coated: Non-stick, chemical resistance
  • Epoxy Coated: Extra corrosion protection
  • Dacromet: Thin film, high performance

Every job is different and most will require custom anchor bolts designed by an engineer to have unique diameters, thread lengths, finishes, as well as hex nut, flat washer, and anchor plate configurations. Unlike connection bolts such as A325 and A490 Hex Head and Tension Control bolts that use a headed bolt in conjunction with a nut to tighten two pieces of material together, anchor bolts are cast in concrete. This becomes the mechanism by which a structure can be fastened to a foundation.

A&M Nut & BoltTrusted Since 1985A&M Nut & Bolt

What Our Customers Are Saying

A&M Nut & Bolt
"This has been my go-to anchor bolt company for 10 years because they are not only reliable, but knowledgeable from Clevis and turnbuckles to J bolts and anchor bolts. Once I place an order I don't have to think about it anymore."
Long-term Customer | 10+ Years Partnership
A&M Nut & Bolt
"A&M Nut & Bolt is our exclusive source for anchor bolts. We rely on their order accuracy and ability to ship to job sites very quickly."
Construction Manager | Industrial Projects

Assembly and specification context

Specify the requirements beyond the grade.

An anchor-rod grade is one part of a complete purchase specification. Include the project’s supplemental requirements and documentation needs with the quotation request.

ASTM F1554 includes supplementary provisions concerning weldable Grade 55 steel, permanent identification and impact properties. Identify any required provisions on the inquiry and purchase order so the supplied material and supporting reports can be checked against them.

If a drawing calls for welding, impact testing, particular markings or a special coating, send that requirement with the drawing. Confirm material certification and the approved fabrication procedure before making a field modification or substitution.

ASTM F1554 official scope and specification

Include with your request

  • Required standard edition, grade and project drawing revision
  • Weldability or impact-testing requirements and supporting reports
  • Required identification, coating and coated length
  • Nut, washer and anchor-plate specifications and quantities per rod
  • Material traceability, country-of-origin or inspection requirements, when specified
Specification and certification review note

Earlier A&M descriptions of S1 weldability and S4 impact testing are being reviewed as company supply claims. Obtain confirmation for the actual material and order; a general website description is not a heat- or lot-specific certificate. The grade tables above are retained reference content and should be checked against the current official specification and project requirements.