ASTM F1554 Anchor Bolts
Standard specification for anchor bolts
ASTM F1554 is the standard specification for anchor bolts, steel, for structural applications. A&M Nut & Bolt manufactures anchor bolts in all three grades of ASTM F1554.
F1554 covers straight and bent, headed and headless anchor bolts, including all-thread rod used for concrete anchorage. It provides three strength grades and two thread classes. Specify the required edition, dimensions, coating and supplementary requirements with your request.
Material Grades
F1554 Grade 36
Grade 36 anchor bolts are your standard, low strength anchor bolt and weldable steel anchor bolt with a minimum yield strength of 36 ksi. These bolts replace ASTM A307 Grade C.
- Tensile strength range: 58–80 ksi
- Yield (min): 36 ksi
- Reference Sizes: 1/2"-4"
- Identification Color: Blue
F1554 Grade 55
Grade 55 anchor bolts provide a minimum yield strength of 55 ksi. Like Grade 36, they can be ordered as hot dip galvanized, mechanically galvanized, or plain black finish.
- Tensile strength range: 75–95 ksi
- Yield (min): 55 ksi
- Reference Sizes: 1/2"-4"
- Identification Color: Yellow
Weldable Grade 55 requires the S1 supplementary requirement. Include it with the order and confirm the material documentation before welding.
F1554 Grade 105
Grade 105 anchor bolts are the highest strength bolts within ASTM F1554. They are manufactured from a heat treated alloy steel and have a minimum yield strength of 105 ksi.
- Tensile strength range: 125–150 ksi
- Yield (min): 105 ksi
- Reference Sizes: 1/2"-3"
- Identification Color: Red
Welding caution: Grade 105 anchor rods are heat-treated, and welding is not recommended because the welding heat can alter their mechanical properties. Refer any proposed welding or field modification to the engineer of record and the applicable material and fabrication requirements. Manufacturer welding guidance
These are selection summaries, not the complete mechanical or dimensional requirements. Confirm the ordered size, strength range, identification and reports against the applicable specification. ASTM F1554 scope and official specification ↗
Points Worth Noting About ASTM F1554
- ASTM F1554 was specifically created to cover bolts with the sole purpose of anchoring structural supports to concrete foundations.
- Grade Substitution: The F1554 substitution provision concerns weldable Grade 55 meeting S1 when Grade 36 is specified. Confirm the applicable edition, project approval and material reports; it is not a general permission to substitute stronger grades. Manufacturer explanation ↗
- Threaded-And-Nutted Anchorage: An embedded nut can be part of an approved anchorage detail. A tack weld alone does not establish equivalence to a forged head. Confirm the design, thread engagement, material weldability and welding procedure before specifying a welded nut. AISC anchor-rod guidance ↗
- F1554 Grade 105 And A193 Grade B7: These are separate specifications. Accept dual certification only when the actual reports establish conformance to both; similar strength values alone do not establish interchangeability. ASTM A193/A193M scope ↗
Our team can help you select the appropriate grade, finish, and configuration for your specific application.
Assembly and specification context
Specify the requirements beyond the grade.
An anchor-rod grade is one part of a complete purchase specification. Include the project’s supplemental requirements and documentation needs with the quotation request.
ASTM F1554 includes supplementary provisions concerning weldable Grade 55 steel, permanent identification and impact properties. Identify any required provisions on the inquiry and purchase order so the supplied material and supporting reports can be checked against them.
If a drawing calls for welding, impact testing, particular markings or a special coating, send that requirement with the drawing. Confirm material certification and the approved fabrication procedure before making a field modification or substitution.
ASTM F1554 official scope and specificationInclude with your request
- Required standard edition, grade and project drawing revision
- Weldability or impact-testing requirements and supporting reports
- Required identification, coating and coated length
- Nut, washer and anchor-plate specifications and quantities per rod
- Material traceability, country-of-origin or inspection requirements, when specified
Specification and certification review note
Earlier A&M descriptions of S1 weldability and S4 impact testing are being reviewed as company supply claims. Obtain confirmation for the actual material and order; a general website description is not a heat- or lot-specific certificate. The grade tables above are retained reference content and should be checked against the current official specification and project requirements.