Bent Bolts
Custom bent anchor bolts for your foundation needs
Bent anchor bolts, also known as L-bolts or J-bolts, are essential for securing structures to concrete foundations. A&M Nut & Bolt manufactures custom bent bolts to your exact specifications.
Common Configurations:
- L-Bolts (90-degree bend)
- J-Bolts (hooked end)
- Custom bend angles
- Various thread lengths
- Multiple diameter options
- ASTM F1554 grades 36, 55, and 105
Specify The Bend Geometry
Provide a dimensioned drawing showing how each leg, opening, radius and thread length is measured. Bend dimensions must match the approved detail and manufacturing agreement.
L-Bolts (90° Bend)
- Bend Radius: Specify the inside radius required by the drawing.
- Leg Lengths: Identify both legs and their measurement points.
- Common Sizes: 1/2" - 1-1/4"
- Applications: Standard column bases, equipment foundations
J-Bolts (Hooked End)
- Hook Length: Provide the required dimension and its measurement points.
- Hook Opening: Specify the inside opening and bend geometry.
- Common Sizes: 3/8" - 1"
- Applications: Light equipment, sign posts, handrails
ASME B18.31.5 addresses bent-bolt configurations and ordering dimensions. A manufacturer's usual bend radius is not a universal design rule. ASME publication preview ↗ · Manufacturer explanation of bend-radius agreement ↗
Earlier Reference Ratios — Confirm Before Use
The earlier A&M reference listed the values below. They are preserved for review, not presented as universal standards or defaults for a new configuration. The leg and hook ratios have not been verified as applicable to every size, grade or project.
- L-bolt bend-radius example: 2x bolt diameter.
- Earlier minimum leg-length reference: 6x bolt diameter.
- J-bolt hook-length example: 4x bolt diameter.
- J-bolt hook-opening example: 1.5x bolt diameter.
Use the approved drawing and confirmed fabrication requirements for the actual order. Do not derive embedment or anchorage capacity from these ratios.
How to Call Out When Ordering
When ordering bent bolts, please provide the following specifications in the order listed:
- Diameter: Bolt diameter (e.g., 3/4", 1", 1-1/4")
- Configuration: L-Bolt (90° bend) or J-Bolt (hooked end)
- Long Leg Length: Length of the straight portion
- Short Leg Length: Length of the bent portion (if applicable)
- Thread Length: Length of threaded portion on straight end
- Material Grade: ASTM F1554 Grade 36, 55, or 105
- Finish: Plain, hot-dip galvanized, or mechanical galvanized
- Quantity: Number of pieces required
Contact us today to discuss your bent bolt requirements.
Assembly and specification context
From the drawing to the concrete placement.
A bent anchor assembly includes the long leg, bent leg, projecting threads and the specified nuts and washers. These details need to work together with the foundation and base-plate drawing.
Before concrete is placed, a template can hold the rods at the required positions while controlling the intended projection and embedment. After the concrete cures, the exposed threaded end provides the connection for the structure or equipment. This is placement context, not a substitute for the project’s engineered anchorage detail.
Show the actual bend geometry on the drawing rather than relying on an L-bolt or J-bolt name alone. Identify how the long leg, short leg and thread lengths are measured. Include any template, nut, washer or plate requirements in the same request.
Include with your request
- Diameter, long-leg dimension, bent-leg dimension and bend geometry
- Thread length, intended projection and drawing references
- Material grade and finish, including any specified coated length
- Nuts and washers per bolt, template needs and assembly instructions
- Quantity, required documents and delivery requirements
Specification and certification review note
Existing bend-dimension ratios above are retained from the development resource and require technical review. Do not use those general ratios to override approved drawings or to establish embedment, capacity or suitability for a particular foundation.